Replacement tube, tap, enema nozzel and douche tip set.

Replacement tube, tap, enema nozzel and douche tip set for Artsana enema kit. Can also be used to extend the length of the standard enema hose by adding on to existing Artsana enema kit.

Length of tubing is 1m 30cm.

Before use

Before and after you take your enema you should always make sure your equipment is thoroughly clean. Check the equipment thoroughly to ensure it is clean. Flush out the tube and tap to ensure that they are clear throughout. 

The enema attachment is the small tip, the vaginal douche attachment the longer tip.  Make sure that the tap mechanism is closed. Fill the enema bag with mineral or filtered water which is at body temperature.

Don't forget that it's really important to clean the equipment after use. Use a gentle but effective cold water sterilising solution like Virkon disinfectant tablets. Replace your tubing every year or after 30 enemas.

Precautions and Storage

Store the equipment safely where it will be secure and cannot be tampered with. Keep it out of the reach of children. Ideally the equipment needs to be stored in a constant coolish temperature, away from direct sources of heat and avoid damp environments. Do not fold the water tube as it will create a kink in it. Replace the tubing annually or after 30 uses.

User Tips

NEVER EVER USE TAP WATER FOR ENEMAS.

Each member of the family should have their own enema kit, if this is not possible then each member should have their own tubing assembly and very strict levels of hygiene should be observed.

If the 1m 30cm gravity feed tubing maybe too short you could extend the length by buying a replacement tubing assembly too. Then you daisy chain the replacement tubing assembly onto the tubing supplied with the standard kit. Doing this means you can increase the gravity feed tubing to 2m 60cms!